AVK DISMANTLING JOINT
PN10, WITH TIE RODS
Contact
AVK Saudi Valves
Jeddah Industrial City, Phase 4, Street no 45 P.O. Box 10830, 21443 Jeddah 24/7 Leakage Repair Service +966 50 595 5166
Dismantling Joint PN10 for water and waste water. Temperature range: -10° C to +70° C. Insulation essential for temperatures of 0° C and below.
AVK dismantling joints provide easy installation and disassembly of flanged pipework and fittings, or flanged equipment such as valves, meters and pumps. The dismantling joints compensate for axial displacement of the pipe during installation and dismantling.
| Variant 265/30-001 | |
|---|---|
| Connection: | Flanged |
| Material: | Steel |
| DN: | DN300 |
| PN: | PN 10 |
Features
Cost effective installation and dismantling with only a few tie-rods
Compensates for axial displacement of the pipe during installation and dismantling as the telescopic action between the inner and outer flange body allows for longitudinal adjustment
Designed with a gland ring arrangement to apply compression on the seal
Standard axial adjustment of ±60 mm
Mild steel with fusion bonded epoxy coating to WIS 4-52-01
Studs, nuts and tie-rods of zinc plated and passivated steel 4.6
Optionally with studs, nuts and tie-rods of stainless steel A2 or acid-resistant stainless steel A4
Optionally PN 25
Option of any drilling within design tolerance.
Downloads
Reference nos. and dimensions:
| AVK ref. no. | DN mm |
Flange drilling |
D mm |
E mm |
L mm |
L8 mm |
L11 mm |
Bolt No. |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|---|
| 265-30-0300-01 | 300 | PN10 | 445 | 400 | 555 | 60 | 360 | M20 | 67 |
Components
| 1. | Flange | |
| 2. | Gland ring | Steel S275JR |
| 3. | Body | Steel S275JR |
| 4. | Seal | EPDM rubber |
| 5. | Stud, nut and washer | Steel zinc plated, passivated |
| 6. | Tie-rod, nut and washer | Steel, zinc plated, passivated |
Test/Approvals
- Type tested to 1.5 X PN
Standards
- Standard flange drilling to EN1092-2 (ISO 7005-2), PN 10
