AVK DISMANTLING JOINT, PN16
Reduced tie rods 25% of the holes, Zink plated bolts, 250µm EP coated
Contact
AVK Saudi Valves
Jeddah Industrial City, Phase 4, Street no 45 P.O. Box 10830, 21443 Jeddah 24/7 Leakage Repair Service +966 50 595 5166
Dismantling Joint PN16 for water and waste water. Temperature range: -10° C to +70° C. Insulation essential for temperatures of 0° C and below.
AVK Series 265/30 dismantling joints provide easy installation and disassembly of flanged pipework and fittings, or flanged equipment such as valves, meters and pumps. This fitting also allows for axial displacement of pipework during construction and is suitable for use with water, sewage and neutral liquids upto 70° C.
| Variant 265/30-002 | |
|---|---|
| Connection: | Flanged |
| Material: | Steel |
| DN: | DN300 - DN1200 |
| PN: | PN 16 |
Features
- Cost effective installation and dismantling with only a few tie-rods
- Compensates for axial displacement of the pipe during installation and dismantling as the telescopic action between the inner and outer flange body allows for longitudinal adjustment
- Designed with a gland ring arrangement to apply compression on the seal
- Standard axial adjustment of ±60 mm
- Mild steel with fusion bonded epoxy coating
- Studs, nuts and tie-rods of zinc plated and passivated steel
- Optionally with studs, nuts and tie-rods of stainless steel A2 or acid-resistant stainless steel A4
- Optionally PN 25
- Optionally flange drilling to ANSI CL150
- The tie rods supplied with this product as standard are for adjustment purposes only and are not specified for full end load restraint purposes.
-
Please contact AVK if full end restraint is required so that the size, quantity and material grade of the tie rods can be quoted
Downloads
Datasheet
Certificate(s)
Installation, Operation & Maintenance
Reference nos. and dimensions:
Scroll for more info
| AVK ref. no. | DN mm |
Flange drilling |
D mm |
E mm |
L mm |
L8 mm |
L11 mm |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|
| 265-30-0300-11 | 300 | PN16 | 460 | 410 | 575 | 60 | 360 | 68 |
| 265-30-0350-11 | 350 | PN16 | 520 | 470 | 575 | 60 | 360 | 80 |
| 265-30-0400-11 | 400 | PN16 | 580 | 525 | 585 | 60 | 360 | 104 |
| 265-30-0450-11 | 450 | PN16 | 640 | 585 | 585 | 60 | 360 | 121 |
| 265-30-0500-11 | 500 | PN16 | 715 | 650 | 605 | 60 | 360 | 149 |
| 265-30-0600-11 | 600 | PN16 | 840 | 770 | 625 | 60 | 360 | 186 |
| 265-30-0700-11 | 700 | PN16 | 910 | 840 | 625 | 60 | 360 | 203 |
| 265-30-0800-11 | 800 | PN16 | 1025 | 950 | 645 | 60 | 360 | 233 |
| 265-30-0900-11 | 900 | PN16 | 1125 | 1050 | 645 | 60 | 360 | 261 |
| 265-30-1000-11 | 1000 | PN16 | 1255 | 1170 | 665 | 60 | 370 | 356 |
| 265-30-1200-11 | 1200 | PN16 | 1485 | 1390 | 665 | 60 | 370 | 481 |
2D/3D drawings
Enquiry
Scroll for more info
Components
| 1. | Flange | |
| 2. | Gland ring | Steel S275JR |
| 3. | Body | Steel S275JR |
| 4. | Seal | EPDM rubber |
| 5. | Stud, nut and washer | Steel zinc plated, passivated |
| 6. | Tie-rod, nut and washer | Steel, zinc plated, passivated |
Test/Approvals
- Type tested to 1.5 X PN
- WRAS approved materials
Standards
- Standard flange drilling to EN1092-2 (ISO 7005-2), PN 16
