AVK DISMANTLING JOINT, PN16
Reduced tie rods 25% of the holes, A4 stainless steel bolts, 300µm EP coating
Contact
AVK Saudi Valves
Jeddah Industrial City, Phase 4, Street no 45 P.O. Box 10830, 21443 Jeddah 24/7 Leakage Repair Service +966 55 909 9395
Dismantling Joint for water and waste water. Temperature range: -10° C to +70° C. Insulation essential for temperatures of 0° C and below.
AVK Series 265/30 dismantling joints provide easy installation and disassembly of flanged pipework and fittings, or flanged equipment such as valves, meters and pumps. This fitting also allows for axial displacement of pipework during construction and is suitable for use with water, sewage and neutral liquids upto 70° C.
| Variant 265/30-141 | |
|---|---|
| Material: | Steel |
| DN: | DN300 - DN1200 |
Features
- Up to +/- 60mm length (axial) adjustment
- Cost effective installation and dismantling with only a few tie-rods
- Compensates for axial displacement of the pipe during installation and dismantling as the telescopic action between the inner and outer flange body allows for longitudinal adjustment
- Designed with a gland ring arrangement to apply compression on the seal
- EPDM seals
- Ductile iron or mild steel with fusion bonded epoxy coating
- Studs and nuts in stainless steel A4
- Tie rods in stainless steel A4
- Options:
- Studs, nuts and tie-rods zinc plated and passivated
- Drilling: CL150, PN10 or PN25 up to and including DN600
.
Downloads
Datasheet
Reference nos. and dimensions:
Scroll for more info
| AVK ref. no. | DN mm |
Flange drilling |
D mm |
E mm |
L mm |
L8 mm |
L11 mm |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|
| 265-30-0300-141 | 300 | PN16 | 460 | 410 | 575 | 60 | 360 | 64 |
| 265-30-0350-141 | 350 | PN16 | 520 | 470 | 575 | 60 | 360 | 75 |
| 265-30-0400-141 | 400 | PN16 | 580 | 525 | 585 | 60 | 360 | 90 |
| 265-30-0450-141 | 450 | PN16 | 640 | 585 | 585 | 60 | 360 | 104 |
| 265-30-0500-141 | 500 | PN16 | 715 | 650 | 605 | 60 | 360 | 119 |
| 265-30-0600-141 | 600 | PN16 | 840 | 770 | 625 | 60 | 360 | 152 |
| 265-30-0700-141 | 700 | PN16 | 910 | 840 | 625 | 60 | 360 | 162 |
| 265-30-0800-141 | 800 | PN16 | 1025 | 950 | 645 | 60 | 360 | 209 |
| 265-30-0900-141 | 900 | PN16 | 1125 | 1050 | 645 | 60 | 360 | 234 |
| 265-30-1000-141 | 1000 | PN16 | 1255 | 1170 | 665 | 60 | 370 | 329 |
| 265-30-1200-141 | 1200 | PN16 | 1485 | 1390 | 665 | 60 | 370 | 413 |
2D/3D drawings
Enquiry
Scroll for more info
Components
| 1. | Flange | |
| 2. | Gland ring | Steel S275JR |
| 3. | Body | Steel S275JR |
| 4. | Seal | EPDM rubber |
| 5. | Stud, nut and washer | Stainless steel A4, Delta Seal |
| 6. | Tie-rod, nut and washer | Stainless steel A4, Delta Seal |
Test/Approvals
- WRAS approved materials
Standards
- Standard flange drilling to EN1092-2 (ISO 7005-2), PN 16
