AVK DISMANTLING JOINT WITH CENTRE FLANGE, PN10/16
Full and half tie rods, zink plated/passivated bolts, 250µm EP coating
Contact
AVK Saudi Valves
Jeddah Industrial City, Phase 4, Street no 45 P.O. Box 10830, 21443 Jeddah 24/7 Leakage Repair Service +966 55 909 9395
Dismantling joint with tie rods & centre flange for water and waste water. Temperature range: -10° C to +70° C. Insulation essential for temperatures of 0° C and below.
AVK dismantling joints provide easy installation and disassembly of flanged pipework and fittings, or flanged equipment such as valves, meters and pumps. The dismantling joints compensate for axial displacement of the pipe during installation and dismantling.
| Variant 265/50-001 | |
|---|---|
| Connection: | Flanged |
| Material: | Ductile iron |
| DN: | DN50 - DN250 |
| PN: | PN 16 |
Features
- Compensates for axial displacement of the pipe during installation and dismantling, as the telescopic action between the inner and outer flange body allows for longitudinal adjustment
- Designed with three flanges connected with tie-rods, and where the centre flange applies compression on the seal through the tie-rods
- Standard axial adjustment of ±30 or ±40 mm dependant upon product size
- Ductile iron end flanges and mild steel centre flange with fusion bonded epoxy coating
- Tie-rods of zinc plated and passivated steel
- Optionally tie-rods of stainless steel A2 or acid-resistant stainless steel A4
- Optionally flange drilling to ANSI CL150
Downloads
Datasheet
Certificate(s)
Installation, Operation & Maintenance
Reference nos. and dimensions:
Scroll for more info
| AVK ref. no. | DN mm |
Flange drilling |
D mm |
E mm |
L11 mm |
L mm |
L8 mm |
Theoretical weight/kg |
Notes |
|---|---|---|---|---|---|---|---|---|---|
| 265-50-0050-11 | 50 | PN10/16 | 165 | 125 | 200 | 330 | 30 | 11 | |
| 265-50-0065-11 | 65 | PN10/16 | 185 | 145 | 200 | 330 | 30 | 16 | |
| 265-50-0080-15 | 80 | PN16 | 200 | 160 | 200 | 330 | 30 | 12 | Tie rods every other hole |
| 265-50-0100-15 | 100 | PN16 | 220 | 180 | 200 | 330 | 30 | 14 | Tie rods every other hole |
| 265-50-0125-15 | 125 | PN16 | 250 | 210 | 200 | 330 | 30 | 30 | Tie rods every other hole |
| 265-50-0150-15 | 150 | PN16 | 285 | 240 | 200 | 330 | 30 | 23 | Tie rods every other hole |
| 265-50-0200-15 | 200 | PN16 | 340 | 295 | 280 | 430 | 40 | 40 | Tie rods every other hole |
| 265-50-0250-15 | 250 | PN16 | 405 | 355 | 280 | 450 | 40 | 52 | Tie rods every other hole |
2D/3D drawings
Enquiry
Scroll for more info
Components
| 1. | Flange | Ductile iron GJS-450-10 |
| 2. | Gland flange | Mild steel |
| 3. | Seal | EPDM rubber |
| 4. | Tie-rod, nut and washer | Steel, zinc plated, passivated |
| 5. | Spigot | Ductile iron GJS-450-10 |
Test/Approvals
- Belgaqua approved
- Type tested to 1.5 X PN
- WRAS approved materials
Standards
- Flange drilling to EN1092-2 (ISO 7005-2), PN10/16
