1. Home /
  2. Product finder

AVK GATE VALVE, FLANGED, PN10/16

EN 558-2 S.14/DIN F4, AISI316 stem, 300µm FBE coating, DN40-600

Contact

AVK Saudi Valves

Jeddah Industrial City, Phase 4, Street no 45 P.O. Box 10830, 21443 Jeddah 24/7 Leakage Repair Service +966 50 595 5166

Flanged gate valve, SS316 stem. For drinking water and neutral liquids to max. 70°C

AVK gate valves are designed with built-in safety in every detail. The wedge is fully vulcanized with AVK’s own drinking water approved EPDM rubber compound. It features an outstanding durability due to the ability of the rubber to regain its original shape, the double bonding vulcanization process and the sturdy wedge design. The triple safety stem sealing system, the high strength stem and the thorough corrosion protection safeguard the unmatched reliability.

Variant 06/34-008
Connection: Flanged
Material: Ductile iron
DN: DN50 - DN600
PN: PN 16
Closing direction: Clockwise to Close

Features

  • Fixed, integral wedge nut prevents vibration and ensures durability
  • Wedge fully vulcanized with drinking water approved EPDM rubber
  • Wedge shoes in PA and guide rails on the body make the wedge slide easily up and down, even with high differential pressure
  • A large conical stem hole going all the way through the wedge ensures circulation and prevents stagnant water
  • Stem in AISI 316 high grade stainless steel with wedge stop and rolled threads for high strength
  • Thrust bearing:
    • DN400 and below: A full circle brass collar keeps the stem firmly lined up and ensures low operating torque
    • DN450 and larger: A double roller bearing takes up the axial forces and furthermore a top flange is fitted to make for installation of an actuator or a gearbox
  • Triple safety stem seal with an NBR wiper ring outermost to protect against contamination from outside, in the middle four NBR O-rings around the radial bearing and innermost an EPDM lip seal as main seal to the system pressure
  • Bonnet gasket in EPDM with a circular cross-section and fixed in a recess to avoid blow-out
  • Counterbored stainless steel bonnet bolts, sealed with hot-melt and encircled by the bonnet gasket
  • Full bore
  • Fusion bonded epoxy coating, 300µm, to DIN 3476

Downloads

Datasheet
Appendix

Reference nos. and dimensions:

Scroll for more info
AVK ref. no. DN
mm		 Flange
drilling		 L
mm		 H
mm		 H1
mm		 H3
mm		 W
mm		 F
mm		 F1
mm		 F2
mm		 Theoretical
weight/kg
06-050-34-0141099 50 PN10/16 150 208 - 290 165 14 17 29 9.0
06-065-34-0141099 65 PN10/16 170 244 - 337 185 17 20 34 11
06-080-34-0141099 80 PN10/16 180 282 - 382 200 17 20 34 14
06-100-34-0141099 100 PN10/16 190 305 - 415 220 19 22 34 17
06-125-34-0141099 125 PN10/16 200 346 - 471 250 19 22 34 22
06-150-34-0141099 150 PN10/16 210 401 - 543 285 19 22 34 31
06-200-34-0141099 200 PN16 230 490 - 660 340 24 27 34 48
06-250-34-0141099 250 PN16 250 620 - 820 420 27 31 47 102
06-300-34-0041087 300 PN10 270 740 - 929 455 27 31 47 111
06-300-34-0141087 300 PN16 270 740 - 929 455 27 31 47 111
06-350-34-01410 350 PN16 290 935 - 1195 564 32 37 55 220
06-400-34-01610 400 PN16 310 960 - 1250 580 32 37 55 240
06-450-34-01410 450 PN16 330 1170 1090 1490 758 30 - 75 487
06-500-34-01410 500 PN16 350 1140 1060 1500 834 30 - 75 559
06-600-34-01410 600 PN16 390 1285 1205 1705 964 30 - 75 762
2D/3D drawings
Enquiry
Scroll for more info

Components

1. Stem Stainless steel 316
2. Wiper ring NBR rubber
3. O-ring NBR rubber
4. Radial bearing Polyamide
5. Bonnet Ductile iron GJS-500-7 (GGG-50)
6. Thrust collar Brass DZR CW602N
7. Stem seal EPDM rubber
8. Bonnet bolt Stainless steel A2
9. Bonnet gasket EPDM rubber
10. Wedge nut Brass DZR CW626N
11. Wedge Ductile iron, EPDM encapsulated
12. Body Ductile iron GJS-500-7 (GGG-50)
13. Key Stainless steel
14. Wiper ring NBR rubber
15. O-ring NBR rubber
16. Radial bearing Polyamide
17. Thrust washer Stainless steel 1.4104 (430F)
18. Roller bearing Stainless steel
19. Thrust collar Stainless steel 1.4104 (430F)
20. O-ring NBR rubber
21. Stem seal EPDM rubber
22. Wedge shoe Polyamide

Test/Approvals

  • Seat: 1.1 x PN (in bar), Body: 1.5 x PN (in bar). Operation torque test
  • Approved by SASO

Standards

  • Designed according to EN 1074 part 1 & 2, Designed according to EN 1171
  • Face to face according to EN 558 Table 2 Basic Series 14
  • Standard flange drilling to EN1092-2 (ISO 7005-2), PN 16
0 Files In the package